Fixing a Stuck Rokinon Auto Teleconverter 2x

A teleconverter is an indispensable tool for professional photographers desiring to prolong their lenses’ focal length rather than buying expensive longer focal length lenses.

Occasionally, however, the Rokinon Auto Teleconverter 2x triggers an inconvenience for the users—it turns out to be too good—too tightly secured onto the lens or even the camera body. If you are facing rokinon auto teleconverter 2x stuck issue then, you have no need to panic as this guide will make sure that you know all the correct instructions to resolve it.

Step 1: Evaluate the Situation

Before attempting to forcefully remove the teleconverter, take a step back and think about what you are doing. Ask yourself: Is it screwed onto the lens or body? Or Do you encounter any difficulty when trying to look it off?

Comprehending the problem will protect against unwarranted harm by removing it.

Step 2: How to Remove a Stuck Rokinon Teleconverter Safely

There are a few steps that you need to carefully follow in case the rokinon teleconverter stuck.

Look for a Locking Device

In most cases, the teleconverter will have a release button or bayonet lock. Its complete release may be prevented by dirt or fatigue of the mechanism. Work the release repeatedly while gently rotating the teleconverter.

Progressively Turn the Teleconverter Out

Hold the lens or the camera tightly so it does not fall and with your other hand slowly work the teleconverter anti-clockwise or up if the standard acquisition is directional.

Get a Rubber Grip or A Jar Opener

There are tools such as rubber jar openers that could help with the slipping of fingers and also rubber grips.

Switch to a Lens Spanner Wrench (As a Last Resort)

In cases where the teleconverter sticks in the camera, you may use a lens spanner wrench which is what people who service cameras use to loosen stubborn rings.

Step 3: Examine Common Difficulties if the Problem is not Eliminated

If the attachment of Rokinon Auto Teleconverter 2x holds more chances of error, there could be some causes behind it:

• Dirt or Debris in the Mount – Sometimes, small dirt particles get stuck on the mount. Use a brush, some clean air or the teleconverter cleaning kit to clean the sticking photoreceptor and lens off contacts.
• Misalignment of the Metaphone – Always make sure that the teleconverter is correctly aligned before it is fastened.
• Worn or Damaged Mounting Rings – In case the metallic ring is deformed or has a scratch on it, its sticking problems can result. Markings should be looked at for wear.

Step 4: Eliminate Future Problems

If you want to make sure that you do not encounter the same issue in the future then, you can adhere to these instructions.

• Lens and teleconverter mounts must be kept spotless – dust and dirt accumulation can lead to issues in mounting the gear.
• Use some lens grease – use only sparing amounts of special camera grease to avoid the lens part sticking.
• Put Away Carefully – never leave the teleconverter in the open; keep it in a safe container away from any dust.

Following the instructions in the article carefully will ensure that your teleconverter is easily removed. You can also refer to the website Techzeel to learn more about the same.